Dream Performance
Honda S2000 F50 Brembo Brake kit
Honda S2000 F50 Brembo Brake kit
Couldn't load pickup availability
A dedicated F50 big brake kit for the S2000, built around the AP1 and AP2 front end rather than adapted from another chassis. Genuine S2000 Brembo calipers, professionally rebuilt, paired with our own 330mm slotted rotors. Plug and play with standard or braided lines, no modifications required.
Fitment
- Honda S2000 AP1 and AP2, all years
- 100 percent plug and play on the S2000 front end
What is included
- Professionally rebuilt genuine S2000 Brembo F50 four piston calipers
- Dream Performance 330mm slotted rotors
- Stainless steel braided brake lines
- Complete mounting hardware
Wheel clearance, read this first
Factory S2000 wheels do NOT clear this kit. You will need spacers or aftermarket wheels with big brake clearance. Minimum wheel spec: 17 x 8.5 with +35 offset. Unsure about your setup? Send us your wheel model before ordering and we will confirm.
Pads
Pair with EPHONE RS Blue for street driving (0 to 650 degrees) or EPHONE TS Purple for track work (50 to 850 degrees). Full comparison in the F50 brake kit guide.
Installation and shipping
Professional installation required, followed by proper pad bedding before hard use. Dispatched from Australia, tracked shipping worldwide. Building the rest of the car too? See the S2000 floor mats guide.
⚠️Please view our TERMS OF CONDITION before purchase.
Terms of Condition / Warranty / Return
Terms of Condition / Warranty / Return
Warranty & Product Use Terms Warranty Policy
Unless otherwise stated, all products we sell are brand new and come with the manufacturer’s warranty.
Warranty is valid only for the original purchaser and requires proof of purchase, such as order number or invoice.
Products purchased second-hand or through unauthorised channels are not covered by any warranty.
Not Covered Under Warranty or Returns
Once a product has been installed or used, it is deemed accepted by the buyer in its current condition. Any subsequent damage, defect, or performance issue is the buyer’s responsibility. Dream Performance will not be liable and does not provide returns, exchanges or warranty support in such cases.
Damage resulting from DIY installations, or installations performed by unqualified mechanics or non-standard workshops, is not covered by any warranty.
Items that are not faulty, or that can no longer be considered brand new due to installation or use, are not eligible for return. All electrical products, as well as items used for racing, off-road, or modifications not approved for public road use, carry no warranty whatsoever.
If you discover a product defect before installation or use, please contact us immediately with photos. Follow our return process; return shipping costs are borne by the buyer. Once confirmed to be a valid product defect, we will arrange a replacement.
Product Images & Colour Disclaimer
We make every effort to accurately depict product colours and details. However, due to differences in screens and lighting conditions, actual products may vary slightly from images.
Returns will not be accepted for colour differences or reasons related to personal expectations.
Product Use & Compliance Responsibility
Some products may not be ADR or CAMS approved, and are not intended for public road use — only for show, racing, closed-course or off-road applications. Ensuring that vehicles and components comply with all federal, state, and local laws is the sole responsibility of the buyer. Any risks and liabilities arising from the use of performance products are solely borne by the buyer, and Dream Performance accepts no associated liability.
Pre-Order Policy
All pre-order items are custom made to order, and cannot be cancelled, changed, or refunded under any circumstances.
Right of Final Interpretation
Dream Performance reserves the right of final interpretation of the above terms.
Share
