Dream Performance
Dream Performance GD3 Jazz Cowl Heat Extractor
Dream Performance GD3 Jazz Cowl Heat Extractor
Couldn't load pickup availability
A 3D printed cowl heat extractor for the GD3 Jazz and Fit. It sits at the base of the windscreen and uses the low pressure zone that forms there at speed to pull hot air up and out of the engine bay.
Why it works
Air stacks up against the windscreen and creates a high pressure area, and just ahead of it the pressure drops. Venting into that low pressure zone gives underbonnet heat somewhere to go while the car is moving, instead of sitting against the intake and the bay.
Fitment
- Honda Jazz and Fit GD3
- Two versions, 2002 to 2004 and 2005 to 2007
- The rain cowl was redesigned between those years and the two are not interchangeable
- Check the reference photos in the last images against your car before choosing
Material
- 3D printed in ASA, chosen for heat tolerance and UV resistance
- ASA holds up outdoors where PLA and ABS go brittle or fade
FAQ
Which year do I have? Compare your rain cowl to the reference photos. If it is still unclear, send us a photo and we will tell you.
Anything else for the GD3? See the GD3 checker floor mats and the tailgate garnish.
Shipping
Based in Melbourne, Australia. Worldwide shipping.
⚠️Please view our TERMS OF CONDITION before purchase.
Terms of Condition / Warranty / Return
Terms of Condition / Warranty / Return
Warranty & Product Use Terms Warranty Policy
Unless otherwise stated, all products we sell are brand new and come with the manufacturer’s warranty.
Warranty is valid only for the original purchaser and requires proof of purchase, such as order number or invoice.
Products purchased second-hand or through unauthorised channels are not covered by any warranty.
Not Covered Under Warranty or Returns
Once a product has been installed or used, it is deemed accepted by the buyer in its current condition. Any subsequent damage, defect, or performance issue is the buyer’s responsibility. Dream Performance will not be liable and does not provide returns, exchanges or warranty support in such cases.
Damage resulting from DIY installations, or installations performed by unqualified mechanics or non-standard workshops, is not covered by any warranty.
Items that are not faulty, or that can no longer be considered brand new due to installation or use, are not eligible for return. All electrical products, as well as items used for racing, off-road, or modifications not approved for public road use, carry no warranty whatsoever.
If you discover a product defect before installation or use, please contact us immediately with photos. Follow our return process; return shipping costs are borne by the buyer. Once confirmed to be a valid product defect, we will arrange a replacement.
Product Images & Colour Disclaimer
We make every effort to accurately depict product colours and details. However, due to differences in screens and lighting conditions, actual products may vary slightly from images.
Returns will not be accepted for colour differences or reasons related to personal expectations.
Product Use & Compliance Responsibility
Some products may not be ADR or CAMS approved, and are not intended for public road use — only for show, racing, closed-course or off-road applications. Ensuring that vehicles and components comply with all federal, state, and local laws is the sole responsibility of the buyer. Any risks and liabilities arising from the use of performance products are solely borne by the buyer, and Dream Performance accepts no associated liability.
Pre-Order Policy
All pre-order items are custom made to order, and cannot be cancelled, changed, or refunded under any circumstances.
Right of Final Interpretation
Dream Performance reserves the right of final interpretation of the above terms.
Share
