Skyline GTR values have climbed to the point where most examples now live as garage cars, driven on good days and stored the rest of the time. That makes storage protection the cheapest insurance a GTR owner can buy: a few hundred dollars guarding paint on a car worth six figures. We make custom fit velvet stretch indoor covers for every GTR generation, each patterned for its own chassis. Here is how they differ and which one fits your car.
Why each generation needs its own pattern
A cover that fits an R32 does not fit an R34, and a universal cover fits none of them. The R32 and R33 differ in wheelbase and rear overhang. The R34 carries a taller rear wing and sharper roofline. The R35 is a wider, longer car entirely, closer to a supercar footprint than a Skyline. Our covers are cut per chassis with mirror pockets and wing clearance in the right places, so the fabric hugs the body instead of tenting over the wing or sagging at the bumpers. On cars where originality drives value, a cover that stays put without straps or clips also means no contact points rubbing the same spot for months.
R32 GTR (BNR32, 1989 to 1994)
The Godzilla original, and now the generation most likely to be a long term keeper. Many R32s in Australia are freshly imported and immediately garaged. The breathable knit matters here more than on any other generation: thirty year old paint and older seals do not want moisture trapped against them, and a stretch cover lets the car breathe while keeping dust off.
R32 GTR BNR32 Indoor CoverShop now →R33 GTR (BCNR33, 1995 to 1998)
The R33 runs a longer wheelbase than the R32, which is exactly why R32 covers never sit right on one. Our BCNR33 pattern accounts for the longer rear deck, so the hem seats under both bumpers instead of pulling short at one end.
R33 GTR BCNR33 Indoor CoverShop now →R34 GTR (BNR34, 1999 to 2002)
The most valuable of the Skyline generations and the one owners are most careful with. The R34 pattern is cut around the tall factory wing, the single detail cheap covers always get wrong: fabric stretched tight over a wing becomes a contact point that wears paint on the wing endplates. Ours clears it properly, then hugs the body below.
R34 GTR BNR34 Indoor CoverShop now →R35 GTR (2007 onward)
The R35 is the generation still being daily driven, and it gets two products. The indoor cover is cut for the R35's wide track and long nose. And because R35s see real use, we also make twist yarn floor mats for it: a dense weave that handles daily heel traffic while looking factory plus.
Storing a GTR properly, in short
Cover only a clean car, and only once exhaust and brakes have cooled after a drive. Lift the cover on and off rather than sliding it. Wash the cover cold two or three times a year with no fabric softener. The full routine is in our cover care guide, and if you are comparing materials first, start with the buying guide.
Fitment and shipping
Every cover above is patterned for its exact chassis code, BNR32, BCNR33, BNR34 or R35. GTRs live worldwide and so do our customers: dispatched from Australia, shipped worldwide. Wide body or aero equipped car? Tell us your setup and we will pattern for it.