Honda Civic Chassis Codes Explained: EF9, EG6, EK9 and DC2, What Fits What
Share
Short answer: nineties Hondas are sold by nickname, EF, EG, EK, but the parts fit by floorpan and by body shell, and those do not line up the way the nicknames suggest. The EK Civic and the DC2 Integra share a floorpan, so they take the same floor mats, but they are different shells, so they take different covers. The EF9 hatch and the ED6 sedan share mats but not a cover. This guide lays out what is actually shared, generation by generation, so you order once.
The four generations at a glance
| Nickname | Chassis codes | Years | Floor mat pattern | Cover pattern |
|---|---|---|---|---|
| EF / ED | EF9 SiR hatch, EF2, EF3, EF5 hatch, ED6, ED9 sedan | 1988 to 1991 | EF9 ED6 ED9 set, cut as hatch or sedan | EF9 ED6 ED9 cover, hatch or sedan |
| EG | EG6 SiR, EG4, EG5 hatch, EG9 Ferio sedan | 1991 to 1995 | EG6 EG9 set | EG6 EG9 SiR cover, also fits EG4 and EG5 |
| EK | EK9 Type R, EK4 SiR, EK3, EK1 hatch, EK Ferio sedan | 1996 to 2000 | EK4 EK9 and DC2 set | EK9 EK1 EK4 cover, hatch only |
| DC2 | DC2 Integra coupe, DC4 | 1995 to 2001 | EK4 EK9 and DC2 set | Integra DC2 cover, coupe only |
Two rules fall out of that table. Floor mats follow the floorpan, so one mat pattern can serve a hatch, a sedan and even a different model if the footwell is the same. Covers follow the outer shell, so every body shape needs its own cut, and a sedan will never share a cover with the hatch it is based on.
EF and ED: the fourth generation, 1988 to 1991
The EF9 SiR hatch and the ED6 and ED9 sedans sit on the same floorpan, so they share one floor mat pattern, cut as a hatch version or a sedan version because the rear floor differs. The EF2, EF3 and EF5 hatches fit the hatch pattern too. The set is available as a full set, front and rear, or a front pair for the driver and passenger only, which suits a car that rarely carries anyone in the back.
The cover is a separate matter. This is one of the lowest and narrowest shells in the range, which is exactly where a universal cover pools at the sills and moves against the paint. Hatch and sedan are different bodies, so there are two cover patterns, and you tell us which you have when you order. Thirty year old clearcoat is thinner and softer than modern paint, so the napped inner face and a tight fit matter more on this car than on something new.
One trap: the CR-X of the same era, the EF6, EF7 and EF8, is a shorter car. Its rear floor is cut short behind the front seats, so a Civic rear mat will not sit flat. The CR-X has its own set.

EF9 ED6 ED9 Checkered Floor Mats
Shop now →
EF9 ED6 ED9 Indoor Car Cover
Shop now →
EF9 ED6 ED9 Checkered Boot Mats
Shop now →
CR-X EF8 Checkered Floor Mats
Shop now →EG: the fifth generation, 1991 to 1995
The EG6 SiR hatch, the EG4 and EG5 hatches and the EG9 Ferio sedan share a footwell, so one mat pattern covers all of them. It is a shorter wheelbase car than the EK that followed, which is why EG mats and EK mats are not interchangeable even though the cars look related. Left hand drive and right hand drive are both available, so the pattern suits imported and local cars alike.
The EG6 EG9 SiR cover is patterned for the low, compact EG shell and fits the EG4 and EG5 on the same body. It is made to order, and the current batch timing is confirmed at purchase.
The CRX del Sol, EG1, EG2, EJ1 and EJ2, is a related generation but a different car: a short targa body with a removable roof panel. It has its own mats and its own cover, which is cut for the car with the panel in place. Do not cover an open cabin, dust settles straight onto the seats and dash.

EG6 EG9 Checkered Floor Mats
Shop now →
EG6 EG9 SiR Indoor Car Cover
Shop now →
CRX del Sol Checkered Floor Mats
Shop now →
CRX del Sol Indoor Car Cover
Shop now →EK and DC2: one floorpan, two shells, 1995 to 2001
This is the pairing that confuses people most, and it is our best selling mat pattern for a reason. The EK Civic, 1996 to 2000, and the DC2 Integra, 1995 to 2001, sit on the same floorpan, so one checkered mat set fits the EK9 Type R, the EK4 SiR, the EK1 and EK3 hatches, the EK Ferio sedan, and the DC2 Integra including the Type R. Three colourways, red, grey or yellow with black checkered pattern, in left or right hand drive.
Covers split by body. The EK9 EK1 EK4 cover is patterned for the EK hatch, a short car with a steep tailgate that generic covers bridge straight over; the cut follows the rear glass down to the bumper. The factory EK9 wing clears, taller aftermarket wings need a custom cut. The Integra DC2 cover is patterned for the two door coupe, which is wider at the rear guards than the Civic it shares a platform with, and it is cut around the factory Type R spoiler.
Two bodies are not covered by either pattern. The EK Ferio sedan is a different shell from the hatch. The DB8 four door Integra Type R is longer through the middle than the DC2, so a coupe cover sits short on it. For either of those, ask us for a custom pattern.
Boot mats are per shell as well: the EK4 EK9 boot mats for the hatch boot floor, the DC2 DC4 boot mats for the coupe. Both use the same carpet and checkered weave as the floor mats, so the whole interior matches. If you are in the United States, these are what you would call trunk mats or cargo liners, and the DC2 Type R was sold there as the Acura Integra Type R. Same car, same floor.

EK4 EK9 and DC2 Checkered Floor Mats
Shop now →
EK9 EK1 EK4 Indoor Car Cover
Shop now →
Integra DC2 Indoor Car Cover
Shop now →
EK4 EK9 Checkered Boot Mats
Shop now →
DC2 DC4 Checkered Boot Mats
Shop now →What is the same across all of them
Every mat set here is cut and bound to order in high low loop carpet, with a nylon heel pad on the driver mat where the wear actually happens, and rubber nipple backing plus velcro strips so the mat stays put under braking. Every cover is velvet stretch with four way flex and a soft napped inner face against the paint, elasticated front and rear so one person can fit it, and breathable, because waterproof fabric on a garaged car traps condensation that does more harm than dust.
Care is the same too. Mats: vacuum, brush with mild detergent for a deep clean, air dry fully, never machine wash. Covers: machine wash cold on gentle, no fabric softener, air dry, two or three times a year. The full routine is in the cover care guide, and if you are new to indoor covers, start with the buying guide.
Not sure which chassis you have?
Send us a photo of your build plate before ordering and we will confirm the pattern. It takes a minute and saves a return. A Melbourne based business, shipping worldwide. Import duties and taxes on international orders are covered by us.